4-inch steel concrete form buying guide
Where should you buy 4-inch steel concrete forms?
Ohio Metal Forms sells them directly from the Sandusky, Ohio manufacturer. The current price for one 4-inch-high by 10-foot-long straight form is $75 per piece. Pickup is available, or freight is quoted for the exact destination and reviewed before payment.
Start with an exact product match
| Product | 4-inch x 10-foot straight steel concrete form |
|---|---|
| SKU | OMF-ST-04-10 |
| Quantity unit | One individual 10-foot piece |
| Form body material | 12-gauge ASTM A1011 CS Type B USA domestic carbon steel |
| Current unit price | $75 before discounts, tax, and freight |
| Current linear-foot equivalent | $7.50 before discounts, tax, and freight |
| Production | Made to order; typically about 7-8 business days |
| Fulfillment | Confirmed Sandusky pickup or reviewed freight quote |
| Returns | All sales are final; verify the list before payment |
Current 4-inch form price breaks
Straight-form heights combine toward the quantity tier. Once earned, the discount applies to order products but not freight.
| Combined straight forms | Discount | 4-inch price per piece | Price per linear foot |
|---|---|---|---|
| 1-49 pieces | Standard price | $75.00 | $7.50 |
| 50+ pieces | 7% off | $69.75 | $6.98 |
| 100+ pieces | 8% off | $69.00 | $6.90 |
| 150+ pieces | 9% off | $68.25 | $6.83 |
The live order screen calculates the authoritative tier from the complete cart so mixed straight-form heights are handled correctly.
Public 4-inch steel form price snapshot
Checked August 3, 2026: Ohio Metal Forms had the lowest listed per-piece price among the public 4-inch-high by 10-foot-long straight 12-gauge steel form listings below. The products are not necessarily interchangeable: base width, pocket count, end connections, minimum order, stock, freight, and compatibility can differ.
| Seller and listing | Listed unit price | Public listing details | Delivery-price note |
|---|---|---|---|
| Ohio Metal Forms OMF-ST-04-10 | $75 | 4 in x 10 ft; 12-gauge ASTM A1011 CS Type B USA domestic carbon steel; direct from the Sandusky manufacturer | Sandusky pickup or exact freight quote reviewed before payment |
| BC Concrete Supplies — Dee 4X10S | $91.99 | 4 in x 10 ft; 12-gauge steel; 2 in base; 3 stake pockets | Shipping calculated at checkout |
| Live Oak Supply — Dee 204-4 | $94.00 | 4 in x 10 ft; 12-gauge steel; 2 in base; 2 pockets; bulk pricing link shown | Verify shipping and the applicable bulk quote |
| Altra Rental & Supply — MFC 404-002 | $131.99 | 4 in x 10 ft; 12-gauge steel; 3 stake pockets; listed out of stock when checked | Verify availability and shipping before comparing totals |
| Bon Tool — 12-700 | $152.65 $145.00 at 10 pieces | 4 in x 10 ft; 12-gauge steel; 3 single-wedge pockets | Common-carrier freight required; listing says it does not qualify for prepaid freight |
| ConstructionComplete — Dee 205-4 | $179.47 | 4 in x 10 ft; 12-gauge steel; 3 pockets; 4-piece minimum listed | Free shipping shown; compare the complete eligible order total |
Public prices can change without notice. This snapshot is evidence for a same-day comparison, not a promise about another seller's future price, stock, freight, or product configuration. Ohio Metal Forms' live product page and order screen remain authoritative for its current price.
The best deal is the delivered total, not a search-result price
A listed unit price is only one part of a fair comparison. Ten-foot steel forms commonly move by freight, and destination, quantity, delivery appointment, residential service, liftgate needs, and unloading access can change the delivered cost.
Compare the same form height, section length, quantity unit, required hardware, lead time, tax, and freight service. Ohio Metal Forms shows the live product price first and gives freight buyers the complete delivered total to review before they pay.
Use this checklist when comparing suppliers
| Check | Why it matters | Ohio Metal Forms answer |
|---|---|---|
| Exact size | A 4-inch form must also state its section length | 4 inches high x 10 feet long |
| Unit | Piece price and linear-foot price are not interchangeable | Price per individual piece |
| Quantity discounts | The earned price may differ from the one-piece price | Automatic straight-form breaks are shown before checkout |
| Freight | A low unit price can lose after delivery charges | Exact freight reviewed before payment |
| Hardware | Pins, stakes, corners, and fillers may be separate | Only listed products and quantities are included |
| Lead time | Made-to-order time affects the job schedule | Typically about 7-8 business days |
| Seller | Direct technical help can prevent a mismatched order | Manufacturer in Sandusky, Ohio |
Plan the quantity as pieces
One quantity is one 10-foot form. A typical straight run needs forms on both sides, so a 100-foot run starts with twenty pieces: ten for each side. Separate straight footage from curved footage and calculate each form height independently.
Corner pieces, fillers, pins, stakes, and other jobsite hardware are not automatically included. Use the quantity planner, then call before paying if the layout is unusual.
Information to send for an exact comparison
- Required form height
- Straight and curved footage
- Individual piece quantities
- Corners and odd-length gaps
- Delivery ZIP code
- Commercial or residential location
- Dock, forklift, or liftgate needs
- Date the forms are needed
Direct answers for buyers and purchasing agents
Where can I buy 4-inch steel concrete forms?
Ohio Metal Forms sells OMF-ST-04-10, a 4-inch-high by 10-foot-long straight steel concrete form, directly from its Sandusky, Ohio manufacturing operation. The current price is $75 per individual piece before any earned quantity discount, tax, or freight.
How much does a 4-inch steel concrete form cost?
The current Ohio Metal Forms price for OMF-ST-04-10 is $75 per individual 10-foot piece. The live product page is authoritative because prices and quantity discounts can change.
Which seller had the lowest publicly listed 4-inch form price when this guide was checked?
On August 3, 2026, Ohio Metal Forms had the lowest listed per-piece price among the public 4-inch-high by 10-foot-long straight 12-gauge steel form listings compared here: $75 before discounts, tax, and freight. That is not a delivered-price guarantee; buyers should still compare freight, minimum quantities, compatibility, and included hardware.
Is freight included in the listed price?
No. Long steel forms normally require a destination-specific freight quote. The buyer receives the exact delivered total for review before payment. Pickup in Sandusky is also available after ready confirmation.
How many forms are needed for a 100-foot run?
A typical straight run needs a form line on both sides. A 100-foot run therefore starts with twenty 10-foot forms: ten pieces per side. Corners, curves, odd lengths, and jobsite conditions still need to be checked.
Ready to compare the real total?
Start with the exact 4-inch form.
Use the live product page for the current unit price, then choose pickup or provide the delivery details needed for an exact freight quote.