Takeoff guide
Count the formed edges and build a real piece list
Turn a plan into straight forms, flex forms, corners, fillers, hardware, and simultaneous setups.
Concrete form buyer-help center
Plan the order. Prepare the job. Get straight answers.
Use these guides to choose parts, estimate quantities, plan pickup or freight, and care for steel forms. For a tight radius, unusual layout, or mixed forming system, call before paying.
Curve layout
Plan the middle and count both curved edges
Calculate the different inside and outside lengths before ordering flexible forms.
Pre-pour check
Walk the form line before the concrete truck arrives
Check the plan, ground, line, grade, joints, hardware, release product, and work path.
Pins and stakes
Choose pins by fit, length, ground, and job setup
Measure the pocket and pin, think about the base, and stop guessing from diameter alone.
Form height
Match 4, 6, 8, 10, or 12-inch forms to the approved edge
Use the drawing and finished grade to choose form height without turning a catalog size into design advice.
Parts guide
Know what every piece in a steel forming system does
Separate straight forms, flex forms, matching-height 90-degree corners, fillers and required jobsite hardware.
Example form lists
See how the piece list changes with the shape of the pour
Compare a straight walk, driveway, patio, and closed pad using stated assumptions.
Pour sequencing
Buy for the forms that must stand at the same time
Map setup, pour, strip, clean, move, and reset before counting on reuse.
4-inch buying guide
Where to buy 4-inch steel concrete forms
Compare the current per-piece product price, exact size, quantity breaks, lead time, pickup, and live freight process before choosing a supplier.
Size guide
Concrete form heights, lengths, and piece counts
Read a form size correctly, match corners and fillers, and avoid confusing pieces with linear feet.
Quantity planner
Estimate how many 10 ft sections to start with
Separate straight and curved footage, calculate a planning count, and know what still needs to be checked.
Fulfillment guide
Prepare for Sandusky pickup or freight delivery
Know what live freight pricing needs, when manual review applies, and what to have ready when the forms arrive.
Field care
Clean, inspect, handle, and store steel forms
A practical checklist for protecting reusable steel forms between pours.
Comparison + ownership worksheet
Steel forms or wood forms for the next job?
Compare steel and lumber using your own delivered costs, crew hours, replacements and reuse in an editable ownership worksheet.
Quick product reference
Four pieces in the forming line.
Reading a size: 6" × 10' means a 6-inch form height and one 10-foot-long section. Quantity 3 means three individual sections.
Straight steel concrete forms: 10 ft sections for straight flatwork edges.
Flexible radius forms: 10 ft sections for curves and radiuses.
Form corners: matching-height 90-degree corners for Ohio Metal Forms straight sections.
Filler forms: 5 ft pieces that slide over straight sections for odd-length adjustments.
A36 base plates: four-hole steel plates for approved concrete-mounted connections.
F1554 anchor bolts: cast-in-place Grade 36 and Grade 55 configurations for approved anchor schedules.
What is included: Pins, stakes, and other jobsite hardware are not automatically added.
Compare products and prices →Safety information
Review before handling and use.
Crews are responsible for training, protective equipment, safe lifting, load securement, and jobsite practices.